Note - The device naming for the NICs is reported differently by different interfaces and operating systems. The chassis labeling of the physical ports is shown in FIGURE B-1. These servers each have four 10/100/1000BASE-T Gigabit Ethernet ports (NICs). The slots for the PCI cards are detected by the BIOS during startup in the following order:ī.2.2Ğthernet Port (NIC) Device and Driver Naming This section contains information and considerations regarding the system BIOS.ī.2.1 Peripheral Component Interconnect (PCI) Card Slot Booting Priorityįor the locations of the Sun Netra X4250 server PCI slots, see Replacing PCI-X and PCIe Cards. Press and release the right arrow key until the Exit menu screen appears.ħ.ğollow the instructions on the Exit menu screen to save your changes and exit the Setup utility. If you need to modify other setup parameters, use the arrow and Tab keys to navigate to the desired screen and menu item, and then repeat Step 1 through Step 4.Ħ. Modify the Setup field and close the screen.ĥ. Use the Tab key to move back and forth across columns.Ī dialog box shows the available options.Ĥ.Use the Up and Down keys on the keyboard, to scroll through a menu.Fields that can be reconfigured are displayed in color. Use the left and right arrow keys to move sequentially back and forth through the menu screens. Highlight the field to be modified using the arrow and Tab keys. When BIOS is started, the main BIOS Setup menu screen is displayed.Ģ. Enter the BIOS Setup utility by pressing the F2 key while the system is performing the power-on self-test (POST). To access BIOS configuration screens and change the system’s parameters, do the following steps:ġ.
#GATEWAY BIOS QUICKBOOT SERIAL#
Use a terminal (or terminal emulator connected to a computer) through the serial port on the back panel of the server.Use a USB keyboard, mouse, and VGA monitor connected directly to the server.You can access BIOS configuration screens from the following interfaces:
0 kommentar(er)
